Collet Measuring Guide

The easiest way to determine what type of collet your machine has is to measure the length and diameter of the collet.  All collets have a distinctive length and diameter.  Use the chart below to determine the correct collet series for your machine.- If you need advice, give us a call on 013 2924 6070 or send us an email and one of our specialists will help you get the best performance out of your application.

Once you know your correct collet sizing, visit our Collet Product Page.

Collet Series Length Diameter
ER11 18 mm (.708") 11.5 mm (.45")
ER16 27.5 mm (1.08") 17 mm (.67")
ER20 31.5 mm (1.24") 21 mm (.83")
ER25 34 mm (1.34") 26 mm (1.02")
ER32 40 mm (1.57") 33 mm (1.3")
ER40 46 mm (1.81") 41 mm (1.61")
SYOZ 20 34 mm (1.34") 20 mm (0.78")
SYOZ 25 52 mm (2.06") 35 mm (1.38")
TG 75 47 mm (1.85") 27 mm (1.06")
TG 100 60 mm (2.36") 35 mm (1.38")
SD-20 mm SHODA 52 mm (2.06") 20 mm (back side)
SD-C001 SHODA 52 mm (2.06") 16 mm (back side)
SS-22 SHODA 40 mm (1.58") 22.5 mm (.89") OD
SD-C015 52 mm (2.06") 24 mm (back side)
Collet TG Collet TG series


Collet SYOZ 25

collet

Collect sizing chart

Using the right size collection for your tool shank diameter is crucial. First, make sure that you look at the correct sort of collet to fit your machine's spindle. A common error is the attempt to fit a shank tool, that's too large, into a smaller collet. It'll go in and you'll be able to tighten it, but the collet will be stressed.

Find our Collet Product and Collet Nut range below. 

Our Collet Products

For more information about Speeds and Feeds, Chip Loads and Conversion Tables click the links